1. Before the operation of the processing center, wear various labor insurance supplies, lubricate maintenance as required, and check the oil level of each lubricant.

2. When installing the workpiece, it should be lighter to prevent injuries and break the work table. When the workpiece of the processing center is heavier, the carrying capacity of the machine tool workbench should also be verified. The processing center is not allowed to operate overload.

3. The processing program should be checked before it can be run before it can be run. When using the high -speed function of the processing center, confirm the matching of the tool.

4. After the machining center machine tool is started, check the main axis, whether the movement in all directions of the workbench is normal, whether there are abnormal noise, etc.

5. During the processing process, you should always pay attention to whether the motion and processing status of the machine tool is normal and encounter abnormal phenomena. When noise and alarm, it should be stopped immediately. The processing center failure is eliminated before processing.

Good maintenance habits and inspections on cycle can not only increase the service life of the machine tool, but also keep them good processing accuracy. Therefore, we will all be maintained and maintained by the cycle of machine tools. It will be calm when it is.