There are two types of packaging of automatic stamping hardware processing waste, one is automatic processing, and the other is right and non -automatic processing. Let's talk about automatic processing today.

Safety measures for automatic treatment of metal stamping waste:

1. When the general plate is selected for processing, the waste of the metal stamping parts is transported by the conveyor belt, chopped through the waste chogi, and pressed into a square by pressing the press.

2. Waste and receiving drums are wrapped together. In fact, the appearance of the receiving drum is similar to the steel roller. After receiving the roller wrapped in the scrap of the metal stamping part, it can be used as a material for other parts. Because the motor that receives the drum is driven independently, it can also be driven by pressure machines or feed mechanisms.

3. Set a tool on the metal stamping mold, cut off the waste, and then transport the waste material to the packaging machine through the conveyor belt to press the block. It should be noted that during the stamping process, the automatic metal stamping process should be cut off at a certain distance.