1. You should wear a tight protective suit before the processing center operation, the cuffs are fastened, the hem of the shirt cannot be opened, and the gloves are stopped. You must not wear, take off your clothes, or surround the body to prevent the machine from hanging. It is necessary to wear a hard hat. The braids should be put in the hat and must not wear skirts or slippers. Wear the protective mirror: to prevent the iron chips from splashing the eyes, and block it from the operating area around the machine tool.

2. Before the workpiece is installed, the folder method should be fixed. When installing the rough parts, the countertop should be matched to prevent damage to the workbench.

3. When the workbench moves, check the fastener screws, and the tight screw should be tightened when the workbench does not move.

4. When the tool is loaded and unloaded, the taurele part of the milling cutter should be cleaned and the cone hole should be sturdy. It is necessary to wear a protective lens when cutting high -speed cutting. The workbench is banned from stacked things, parts, etc., pay attention to the distance between the tools and the workpiece to prevent the occurrence of a hit.