The horizontal processing center refers to the processing center of the workbench and the main axis as a parallel state. The horizontal processing center usually has three linear sports coordinate axes and a workbench to turn around. After the horizontal processing center can be installed at one time, select different tools based on the program, automatically change the speed of the spindle, and complete the processing of multiple processes on multiple processes in the order of programming. Such processing centers are most suitable for processing boxes. Class parts. Next, let's introduce the four main points of paying attention to the use of the sleeper processing center.

Install the environment of the horizontal processing center

        The horizontal processing center should be installed in a place where it is far from the source of the earthquake, do not be directly shot by the sun, no thermal radiation, and no humidity. If there is a source of earthquakes near the place where the horizontal processing center is installed, the anti -seismic groove should be set up around the horizontal processing center. If the shock -proof ditch is not set, it will directly affect the processing accuracy and stability of the horizontal machining center, and the time will affect the poor contact of the electronic component for a long time, failure, and the reliability of the horizontal processing center.

Strict control of voltage current

        The horizontal processing center is generally installed in the processing workshop, and the large number of machinery and equipment in the processing workshop will inevitably lead to large fluctuations in the power grid. Therefore, the location of the horizontal processing center must strictly control the voltage and current of the power supply, and the voltage and current of the power supply must be controlled within the allowable range of the horizontal processing center. Be sure to keep the voltage and current of the power supply stable, otherwise it will directly affect the horizontal horizontal lying The normal work of the formula machining center.

Temperature and humidity will directly affect the horizontal processing center

        The horizontal processing center generally needs to work normally in an environment below 30 degrees Celsius. Generally, there are row fans and cold air fans in the power distribution box of the horizontal processing center to ensure that the electronic parts and the central process are in the constant temperature state. Essence If the temperature and humidity are too high, the component life of the control system will be reduced, resulting in the increasing failure of the horizontal processing center. If the humidity is increased, the amount of dust on the integrated circuit board will directly lead to poor contact and short circuit failure.