News

Provide customers with high-quality hardware and electronic product services

Home  》  News  》  Industry News

What are the characteristics of precision parts processing

Time:2023-07-03 Preview:


Before the machine works, check whether the moving parts can be filled with smooth oil, then start and check whether the clutch and brake are normal, and run the machine for 1-3 minutes. It is forbidden to operate the machine in case of failure. When working, you should adhere to the correct attitude and have enough physical strength to deal with the work. If you find that you are unwell, you should immediately leave your job and report to the director.


It is prohibited to chat and cooperate with each other during the operation process. Operators should not operate in a state of anxiety or fatigue to avoid accidents and ensure safe operation. All employees should check whether their clothing meets the job requirements before entering the workplace. It is not allowed to wear slippers, high heels, and clothing that affects safety. Long haired individuals should wear a flat top safety helmet. Zhongshan Precision Parts Processing

When replacing the mold, turn off the power first. After the motion part of the press stops running, the equipment can be started to debug the mold. After adjusting the device, manually test the flywheel twice to check if the upper and lower molds are symmetrical and reasonable, whether the screws are secure, and whether the edge pressing ring is in a reasonable position. All other personnel should be separated from the mechanical work area, and debris should be removed from the workbench before turning on the power to start the machinery.




During mechanical operations, it is strictly prohibited to reach into the working area of the slider and use your hands to pick up or loosen the workpiece. When picking and placing workpieces in the mold, please use tools that meet the specifications. If any abnormal sound or machine malfunction is found, the power switch should be immediately turned off and the inspection stopped. After the machine starts, one person will handle the materials and operate the machine. Other personnel are not allowed to press the power structure or step on the foot switch board, and are not allowed to reach into the mechanical working area or touch the moving parts of the machine with their hands.