1. Daily maintenance

Please pay attention to the operator: The following work should be carried out every day:

Every day, clean up the work site, keep the machine tool tidy, and use the cutting fluid to process them in time to avoid the unnecessary load of the bed and the reduction of the equipment accuracy and life! Moreover, it is necessary to avoid processing residual crumbs and leakage holes.

Before using it every day, you must check the storage volume of the coolant in the cooling box, and turn on the cooling machine and pump to ensure that the cooling fluid flows smoothly.

Clean up the main axis motor card head and cap every day.

Every day, pay attention to observe whether the automatic lubricating pump work is normal, and observe the lubricating oil reserves in the automatic lubricating fuel tank, and timely supplement the lubricant to the fuel tank in time.

2. Regular maintenance (3 months cycle)

Please pay attention to the operator: The following work should be performed once every three months:

Disassemble the X -axis, please refer to the guard (cover), clean the screw, chips and dirt on the guide rail (with silk cloth).

Disassemble the shot or shield on the Y -axis, clean up the dandruff and dirt on the screw, the dirt on the guide rail, and clean up the dandruff under the workbench, check the Y -axis optical inspection and the itinerary switch wiring. Loose, whether it is reliable.

What should I pay attention to when maintenance of the carving and milling machine?