Time:2023-11-28 Preview:
1、 Improper installation
1. Using brute force during installation and directly striking the bearing with a hammer can cause significant damage to the bearing; It is the main cause of deformation.
2. Inadequate installation, installation deviation or failure to install in bearing position, resulting in too small bearing clearance. The inner and outer rings are not at the same center of rotation, resulting in non concentricity.
Suggestion: Choose appropriate or professional bearing installation tools, and use specialized instruments for testing after installation.
2、 Poor lubrication
According to the investigation, poor lubrication is one of the main reasons for premature bearing damage. The main reasons include: failure to add lubricants or lubricating oil in a timely manner; Lubricants or lubricating oil not filled in place; Improper selection of lubricants or lubricants; Incorrect lubrication method, etc.
Suggestion: Choose the correct lubricant or oil and use the correct lubrication method.
3、 Pollution
Pollution can also cause premature damage to bearings, which refers to the entry of sand, dust, metal shavings, and other debris into the interior of the bearings. The main reasons include: opening the bearing packaging too early before use, causing pollution; Unclean working environment during installation, causing pollution; The working environment of bearings is not clean, and the working medium is contaminated.
·Analysis of Surface Treatment Methods for CNC Machined Parts ·The main role of the connector contact plating using the electroplating process ·The main role of the connector contact plating using the electroplating process ·CNC tool change and workbench exchange quickly ·Hardware die-casting ·What should be paid attention to when CNC machining aluminum alloy cavities ·The main role of the connector contact plating using the electroplating process ·Precautions for difficult to machine materials in cutting processing ·What are the aspects of the determination of the workpiece and folder? ·How to repair problems in metal die casting?