1. The edge of each template and the exposed part of the assembled molds should be chag or round, which is as small as burrs and sharp corners. There are rough surfaces.

2. Based on the working status of the stamping mold, install the suspension or ring on the appropriate balance position of the stamping mold; the stamping mold with multiple types of surface should be locked with a lock plate to prevent the mobile template from being damaged due to vibration during transportation.

3. The shape size, closed height, installation and positioning size, top -out method, and mold opening itinerary of the stamping mold should meet the requirements of the design drawings and match the parameters of the equipment.

4. Automatic stamping hardware processing molds should have a mark number, each template should be printed with an orderly column number, and the marking of processing and assembly reference angle.

5. The dynamic mold and the connection screws of the stamping mold should be fastened, and the head should not be higher than the plane of the template.

6. Various auxiliary agencies in the appearance of stamping molds, such as hooks, swinging rods, locks, cooling water nozzles, hydraulic and electrical components, which restrict the opening order of the mold, complete, standardized and reliable.