1. The integrated layout of the electromechanical and electrical, the structure is compact, the shape is beautiful, and the operation is convenient. The advanced electronic technology and mechanical devices are used to achieve the best matching, high reliability, and convenient use of maintenance. Use imported Taiwan CNC Reconstruction Workbenters. The three -coordinate movement is concentrated on the posts of the back of the machine,

2. Adopt a pillar movement structure. The limit requirements for the front workbench are very small. The FD92C3S5 is suitable for the processing and manufacturing line;

3. The machine tool is from the base, column, slide, rotary workbench, spindle box, main shaft component, blade component, main drive system, feed transmission system, lubrication system, hydraulic system, pneumatic system, cooling system and crumb system EMU composition;

4. The base, columns, slides, and high -quality cast iron parts of the machine tool are good shock resistance.

5. The three coordinate direction guide rails are high -rigid rolling rails. The friction damping is small, the positioning accuracy is high, the accuracy is persistent, the stability is good, the motion of each component is sensitive, and the mobility of the machine tool is excellent. Reduce the transmission error and reverse gap. Due to the pre -stretching side of the roller screw, the dedicated bearings that support the roller screws are selected to make the transmission accuracy high, high rigidity, and high positioning accuracy;

6. The feed driver uses imported high -performance communication (AC servo motor, connects to the screw without a gap -free shaft.

7. The spindle transmission system uses imported AC servo main axis motor drive. The speed range is 60-6000rpm/min has a large gear range, low-speed torque, and the constant power area is wide. Set the spindle speed directly with S functions. 1 turn/point. Therefore, the best cutting conditions can be selected according to the tool and workpiece material.

8. Adopt imported Taiwan's main axis. The front and posterior bearing are supported by SKF roller bearings, which improves the rigidity and stability of the spindle, and can be cut with high torque to force; high -performance oil sealing lubrication, low temperature rise, and small noise. The front end of the spindle has a air -screen protective device to prevent the pollution of the main axle bearings; the main axis accuracy is high, and the main axis is set within 0.008mm at 300mm;

9. The handle of holding the handle is made of four -petal claws. The knife is reliable; the imported air -voltage supercharged cylinder is used for a loose knife, and the booster cylinder has the function of hitting the knife and blowing gas. It can be blowing when the knife is hit to the apex. Items

10. The capacity of 30 knives is controlled by a knife. It is controlled by the cam. The knife is changed through the movement of the robot and the column.