1. Mechatronics integrated layout, compact structure, beautiful appearance, convenient operation, using advanced electronic technology and mechanical devices to achieve optimal matching, high reliability, and convenient use and maintenance. Use imported Taiwan CNC rotary worktable. The three coordinate motion is concentrated on the column at the rear of the machine tool,

2. Adopting a column moving structure with minimal requirements for the front workbench, the fd92c3s5 is suitable for connecting machines to form a processing and manufacturing line;

3. The machine tool is composed of a base, column, sliding seat, rotary workbench, spindle box, spindle components, tool magazine components, main transmission system, feed transmission system, lubrication system, hydraulic system, pneumatic system, cooling system, and chip removal system;

4. The base, column, and sliding seat of the machine tool are all high-quality cast iron parts with good seismic performance.

5. The guide rails in all three coordinate directions adopt high stiffness rolling guide rails. The friction damping is small, the positioning accuracy is high, the accuracy persistence is good, the stability is good, the movement of each component is sensitive, and the machine tool has excellent dynamic and static characteristics. Reduced transmission error and reverse clearance. Due to pre stretching of the ball screw pair and the use of specialized bearings to support the ball screw, the transmission accuracy, rigidity, and positioning accuracy are high;

6. The feed drive adopts an imported high-performance AC servo motor, which is connected to the screw through a gapless coupling.

7. The spindle transmission system is driven by an imported AC servo spindle motor. The speed range is 60-6000 rpm/min, with a large stepless speed range, large low-speed torque, and a wide constant power range. The spindle speed is directly set using the S function, with a speed increment of 1 rpm. Therefore, the optimal cutting conditions can be selected based on the tool and workpiece material.

8. Adopting imported Taiwan spindles. The front and rear bearings are supported by SKF roller bearings, which improves the rigidity and stability of the main shaft and allows for high torque and strong cutting; Sealed and lubricated with high-performance grease, with low temperature rise and low noise. The front end of the spindle is equipped with an air curtain protection device to prevent contamination of the spindle bearings; High spindle accuracy, with a deviation of within 0.008mm at a distance of 300mm from the spindle end;

9. The clamping handle adopts a four petal claw method. The clamping knife is reliable; The imported pneumatic booster cylinder is used for loosening the knife. The booster cylinder has a continuous function of blowing and punching, and can blow again when the knife reaches its peak. While loosening the knife, the spindle cone hole and knife handle are cleaned;

10. A disc type tool magazine with a capacity of 30 knives, controlled by a cam mechanism, achieves tool change through the movement of a robotic arm and column. The tool change is fast, accurate, stable, and reliable, with a tool change time of less than 2 seconds