1. The operating procedures that should be guarded before booting

     /(1/) Wear labor insurance products and do not wear gloves to operate machine tools.

     /(2/) Read the instructions for the use of machine tools in detail, and safety accidents before being familiar with the operation of the machine.

     /(3/) The operation must be familiar with the role of each button and the precautions for operation.

     /(4/) Pay attention to the content warning on the warning sign of various parts of the machine tool.

     /(5/) Add lubricating, hydraulic oil, hydraulic oil,

     /(6/) The tools around the machine tool should be neatly placed to make the ten.

     /(7/) Add the protective door of the machine tool before adding.

The part to prevent injuries from being injured.

     /(3/) Pay attention to check whether the workpiece and tools are correct and reliable: After the knife is packed, the trial cut should be used manually.

     /(4/) The machine tool running scarf, do not remove the chips, avoid contact with the machine tool motion component with your hands.

     /(5/) When removing dandruff, use a certain tool, and pay attention to the scratching hands and feet by cutting dandruff.

     /(6/) When measuring the workpiece, it must be performed in the state of the machine.

     /(7/) Do not boot the tool when playing thunder. Because the instantaneous high voltage of the lightning strikes and the large current is easy to impact the machine tool, the bad module or loss of the data is changed, causing unnecessary losses.

  3. The operating procedures that should be avoided after work should be avoided

     [1/) Fill in the handover records truthfully and find the problems in time.

       /(2/) To clean the workplace and wipe the cleaning machine, pay attention to keep the machine tool and control equipment clean

       /(3/) Cut off the power supply of the system and leave the doors and windows before leaving.

2. Operation rules that should be abide by in processing operation

     [1/) Civilized production, concentrated energy, eliminating spraying and fatigue operations; prohibiting trouble, chatting, sleeping and arbitrarily leaving positions.

     /(2/) When the machine tool is in a temperature -electric state, the operator must not open and contact the machine tool with lightning standby, a strong electric device