Before the production of stamping parts, the hardware stamping part manufacturer should first design the stamping mold. A good stamping mold is an important equipment for making metal stamping parts. What are the steps of designing stamping molds?

1. First of all, looking for the original material of mold design, this is an indispensable technical preparation before the design of the mold;

2. Examine the product drawings and process cards of stamping parts, review the product drawings and processes on the basis of the original data, analyze the stamping process of the product parts, and see the development of the process and the sketch of each process. If you find that the stamping process is poor or the processes formulated are unreasonable, you should make amendments to the product design and process design department. After approval result;

3. Calculate the relevant process, calculate the relevant process content according to the process content specified in the stamping process card;

4. Draw the molds and other parts of the mold and other parts;

5. Check the mold drawings. After the design of the mold drawing is completed, it must be checked. This is an indispensable step in the design of the stamping part;

6. Preparation of stamping design calculations. Design calculation shows that the processing of high -quality stamping hardware is an important technical document, especially for the process formulation and mold design of some important workpieces; at the end of the design work, the design calculation specification should be prepared for future reference;