JIC35 Guide: over -the -end alarm, indicating that the machine has reached the limit as the position during the operation of the machine; during the override, all the movement shafts are automatically set in the dynamic state. Smooth switches from over -range) will be restored at any time.

(1) Alarm failure

The over -range alarm indicates that the machine has reached the limit during the operation. Please follow the following steps to check:

Computer carving machine

1. Whether the design of the graphics design exceeds the processing range.

2. Check whether the motor axis and the screw connection cable are loose. If, please tighten the screw.

3. Whether the machine and the computer are correctly grounded.

4. Whether the current coordinate value exceeds the soft limit value range.