News

Provide customers with high-quality hardware and electronic product services

Home  》  News  》  Industry News

Do you know the main points of the operation of the CNC processing center?

Time:2023-07-14 Preview:


CNC processing center is a high -tech, relatively complex machine tool equipment. Its operation is much more complicated than ordinary machine tools. It is necessary to operate strictly in accordance with the operating program to ensure the normal operation of the machine tool. Shaanxi Xinsheng CNC Technology Co., Ltd. is a technical engineer who has been engaged in the CNC processing center.



   1. Turn on:



CNC Processing Center


   (1) Connect the main power and CRT monitor power, and start the hydraulic system of the machine tool


   (2) Check whether there are alarms, remove timely, and check the air pressure


   (3) Check whether the knife -changing robot in the CNC processing center is normal


   (4) Return to the reference point to observe whether each axis runs normally


   (5) Check whether the main axis of the machine tool is normal and preheat speed. CNC Processing Center


   (6) Check whether the program is correct and whether the tool is worn


   2. Processing operation


   If all the above inspections are normal, you can clamp and process the workpiece. CNC


   In addition, the operation speed of the CNC processing center is also high. Before performing the operation description, it is necessary to judge the operation description and the correctness of the operation results in advance to understand it before the operation