(1) The safety operation regulations of the processing center must be abide by the processing center.

(2) Wearing protective supplies and cuffs should be worn in accordance with regulations before work. It is not allowed to wear scarves, gloves, ties, and fences. The female workers should be held in the hat.

(3) Check the knife compensation, zero machine tool, and zero workpiece before booting.

(4) The relative position of each button should meet the operating requirements. Early compile and enter CNC programs.

(5) Check the operating conditions of the protection, insurance, signal, location, location, mechanical transmission part, electrical, hydraulic, and number display systems, and cutting can be performed under all normal circumstances.

(6) Trying the machine tool before processing, check the operating conditions of lubrication, mechanical, electrical, hydraulic, and number display, and cutting processing can be performed under all normal circumstances.

(7) After the machine tool enters the process and runs according to the program, the operator is not allowed to contact the movement of the movement, tools and transmission parts, and prohibit the transmission part or obtaining tools through the machine tool. CNC processing center

(8) Adjust the machine tool, clamping workpiece and tools, and wiping machine tools.

(9) Tools or other items should not be placed on electrical appliances, operating cabinets and protectives.

(10) The iron dumbs are not allowed to be removed directly by hand, and special tools should be used to clean.

(11) Discover abnormal conditions and alarm signals, parking should be stopped immediately. Please check.

(12) It is not allowed to leave the job when the machine is running. When you leave, you should place the workbench in the middle position. The knife is returned. You must park and cut off the host